ColorFabb ASA and ASA Low weight 3D filament

Explore the ASA 3D filament by ColorFabb. ASA is a weather proof material being quite resilient against UV light and rain, while LW-ASA also enables you to reduce the weight of your objects.

ASA filament|Neutre 1.75 mm / 0.65 kg
Filament ASA de qualité supérieure avec une résistance exceptionnelle à la température et à la lumière UV
  • Combinaison de PLA/PHA
  • Relativement facile à imprimer
  • Résistance phénoménale à la lumière UV
  • Crée des pièces résistantes aux intempéries
 
€ 24,95
En stock
ASA filament|Neutre 2.85 mm / 0.65 kg
Filament ASA de qualité supérieure avec une résistance exceptionnelle à la température et à la lumière UV
  • Combinaison de PLA/PHA
  • Relativement facile à imprimer
  • Résistance phénoménale à la lumière UV
  • Crée des pièces résistantes aux intempéries
 
€ 24,95
En stock
ASA filament|Noir 1.75 mm / 0.65 kg
Filament ASA de qualité supérieure avec une résistance exceptionnelle à la température et à la lumière UV
  • Combinaison de PLA/PHA
  • Relativement facile à imprimer
  • Résistance phénoménale à la lumière UV
  • Crée des pièces résistantes aux intempéries
 
€ 24,95
En stock
ASA filament|Noir 2.85 mm / 0.65 kg
Filament ASA de qualité supérieure avec une résistance exceptionnelle à la température et à la lumière UV
  • Combinaison de PLA/PHA
  • Relativement facile à imprimer
  • Résistance phénoménale à la lumière UV
  • Crée des pièces résistantes aux intempéries
 
€ 24,95
En stock
LW-ASA filament|Neutre 1.75 mm / 0.65 kg
Filament ASA léger pour des applications uniques
  • Résistant aux UV
  • Lignes de calque mélangées
  • Extrêmement léger
  • S'étend jusqu'à 2 fois le volume
  • Résiste aux hautes températures
 
€ 44,95
En stock
LW-ASA filament|Neutre 2.85 mm / 0.65 kg
Filament ASA léger pour des applications uniques
  • Résistant aux UV
  • Lignes de calque mélangées
  • Extrêmement léger
  • S'étend jusqu'à 2 fois le volume
  • Résiste aux hautes températures
 
€ 44,95
En stock
LW-ASA filament|Noir 1.75 mm / 0.65 kg
Filament ASA léger pour des applications uniques
  • Résistant aux UV
  • Lignes de calque mélangées
  • Extrêmement léger
  • S'étend jusqu'à 2 fois le volume
  • Résiste aux hautes températures
 
€ 44,95
En stock
LW-ASA filament|Noir 2.85 mm / 0.65 kg
Filament ASA léger pour des applications uniques
  • Résistant aux UV
  • Lignes de calque mélangées
  • Extrêmement léger
  • S'étend jusqu'à 2 fois le volume
  • Résiste aux hautes températures
 
€ 44,95
En stock
LW-ASA filament
LW-ASA filament
ColorFabb
Filament ASA léger pour des applications uniques
  • Résistant aux UV
  • Lignes de calque mélangées
  • Extrêmement léger
  • S'étend jusqu'à 2 fois le volume
  • Résiste aux hautes températures
Depuis € 44,95
4 types disponibles

About ColorFabb ASA filament

ASA filament by ColorFabb is a material for more advantaged 3D printer users as the material prints more like ABS, while warping and shrinking is more manageable. The material has two key selling points: its inherent UV stability and high temperature resistance of 96 °C. This results in a well suited material for outdoors.

ASA is more susceptible to warping compared to PLA or PETG type filaments. Especially models with a large footprint can shrink and warp during printing, but compared to ABS in most cases less severe.

Apart from using a large brim and heated buildplate of 90-100°C (or higher if your machine is capable) we can also advice the following. Print a tall skirt around your model to reduce cold air flow around the printed model or print inside an enclosure for better control of the environment temperature.

 

What is ColorFabb LW-ASA filament?

Compared to the ColorFabb ASA the LW-ASA 3D filament has comparable features. However, the ColorFabb LW-ASA material is capable of increasing its volume nearly 2.5 times. The filament density is close to 1,07 g/cm3, but when foamed at its maximum capacity users will achieve part density close to 0.43 g/cm3. The foaming process consists of printing at higher temperature, caising the filament to foam and increase in volume. 

LW-ASA is more susceptible to warping compared to PLA or PETG type filaments. Models with a large footprint can shrink and warp during printing, albeit compared to ABS in most cases less severe.

Apart from using a large brim and heated buildplate of 90-100C (or higher if your machine is capable) we can also advice to print a tall skirt around your model to reduce cold air flow around the printed model or even better: print inside an enclosure for better control of the environment temperature.

 

Pourquoi ReprapWorld ?
  • Commandes expédiées le même jour ouvrable
  • 3.000+ produits dans notre assortiment
  • Plus de 45 000 clients satisfaits dans plus de 40 pays
  • Paiement sécurisé pour toutes les options de paiement
  • Support technique professionnel (plus de 10 ans d'expérience 3D)
Payez en toute sécurité avec


home
Copyright 2009 - 2023 | ReprapWorld