Capricorn

Capricorn is a manufacturer of high quality PTFE tubing for consumer grade and DIY 3D printers. Compared to cheaper brands, both TL and XS tubing reduce friction, and thus the residual effects of pressure buildup, in bowden systems for high speed printing. XS tubing provides a slightly lower friction coefficient along with tighter diameter tolerances for 1.75 mm filament, and thus is the recommended choice for higher quality filament brands. XS tubing is less translucent than TL, but allows for higher temperature filaments for hotends in which the tubing extends into the heater block (most Chinese designs do this).

Official Capricorn XS Heat Break Liner for 1.75 mm (30cm)
High quality heat break liner
  • Inside Diameter: 2mm
  • Outside Diameter: 3mm
  • Color: Deep blue
  • Max temperature: 250 degrees
 
 
€ 11.95
In stock
Premium cutting tool for PTFE tubes
Ultra sharp cutting tool for PTFE tubing
 
 
€ 12.50
In stock
PTFE tubing for 1.75 mm 3D filament|TL Tube / 100 cm
High quality Capricorn PTFE tube set
  • 100 cm low friction PTFE
  • Flexible and low stretch
  • For 1.75 mm filament
  • 1.9 mm Inside Diameter
  • 4 mm Outside Diameter
 
 
€ 13.50
In stock
PTFE tubing for 1.75 mm 3D filament|XS tube / 100 cm
High quality Capricorn PTFE tube set
  • 100 cm low friction PTFE
  • Flexible and low stretch
  • For 1.75 mm filament
  • 1.9 mm Inside Diameter
  • 4.0 mm Outside Diameter
 
 
€ 13.50
In stock
PTFE tubing for 2.85 mm 3D filament|TL Tube / 100 cm
High quality Capricorn PTFE tube set
  • 100 cm low friction PTFE
  • Flexible and low stretch
  • For 2.85 mm filament
  • 3.2 mm Inside Diameter
  • 6.4 mm Outside Diameter
 
 
€ 21.50
In stock
PTFE tubing for 2.85 mm 3D filament|XS tube / 100 cm
High quality Capricorn PTFE tube set
  • 100 cm low friction PTFE
  • Flexible and low stretch
  • For 2.85 mm filament
  • 3.0 mm Inside Diameter
  • 6.4 mm Outside Diameter
 
 
€ 21.50
In stock
PTFE tubing for 1.75 mm 3D filament|TL Tube / 200 cm
High quality Capricorn PTFE tube set
  • 200 cm low friction PTFE
  • Flexible and low stretch
  • For 1.75 mm filament
  • 2.0 mm Inside Diameter
  • 4.0 mm Outside Diameter
 
 
€ 23.50
In stock
PTFE tubing for 1.75 mm 3D filament|XS tube / 200 cm
High quality Capricorn PTFE tube set
  • 200 cm low friction PTFE
  • Flexible and low stretch
  • For 1.75 mm filament
  • 1.9 mm Inside Diameter
  • 4.0 mm Outside Diameter
 
 
€ 23.50
In stock
PTFE tubing for 1.75 mm 3D filament|TL Tube / 100 cm / With cutters
High quality Capricorn PTFE tube set
  • 100 cm low friction PTFE
  • Flexible and low stretch
  • For 1.75 mm filament
  • 3.2 mm Inside Diameter
  • 6.4 mm Outside Diameter
 
 
€ 24.50
In stock
PTFE tubing for 1.75 mm 3D filament|XS tube / 100 cm / With cutters
High quality Capricorn PTFE tube set
  • 100 cm low friction PTFE
  • Flexible and low stretch
  • For 1.75 mm filament
  • 1.9 mm Inside Diameter
  • 4.0 mm Outside Diameter
 
 
€ 24.50
In stock
PTFE tubing for 1.75 mm 3D filament|Set of TL & XS / 100 cm
High quality Capricorn PTFE tube set
  • 100 cm low friction PTFE
  • Flexible and low stretch
  • For 1.75 mm filament
  • 1.9 mm Inside Diameter
  • 4.0 mm Outside Diameter
 
 
€ 24.50
In stock
PTFE tubing for Creality 3D printers|TL Tube / 100 cm / With cutters
High quality Capricorn PTFE tube set with couplings
  • 100 cm low friction PTFE
  • Flexible and low stretch
  • For 1.75 mm filament
  • 2.0 mm Inside Diameter
  • 4 mm Outside Diameter
 
 
€ 29.50
In stock
PTFE tubing for Creality 3D printers|XS Tube / 100 cm / With cutters
High quality Capricorn PTFE tube set with couplings
  • 100 cm low friction PTFE
  • Flexible and low stretch
  • For 1.75 mm filament
  • 1.9 mm Inside Diameter
  • 4 mm Outside Diameter
 
 
€ 29.50
In stock
PTFE tubing for 2.85 mm 3D filament|TL Tube / 100 cm / With cutters
High quality Capricorn PTFE tube set
  • 100 cm low friction PTFE
  • Flexible and low stretch
  • For 2.85 mm filament
  • 3.2 mm Inside Diameter
  • 6.4 mm Outside Diameter
 
 
€ 32.50
In stock
PTFE tubing for 2.85 mm 3D filament|XS tube / 100 cm / With cutters
High quality Capricorn PTFE tube set
  • 100 cm low friction PTFE
  • Flexible and low stretch
  • For 2.85 mm filament
  • 3.0 mm Inside Diameter
  • 6.4 mm Outside Diameter
 
 
€ 32.50
In stock
PTFE tubing for 1.75 mm 3D filament|TL Tube / 200 cm / With cutters
High quality Capricorn PTFE tube set
  • 200 cm low friction PTFE
  • Flexible and low stretch
  • For 1.75 mm filament
  • 2.0 mm Inside Diameter
  • 4.0 mm Outside Diameter
 
 
€ 34.50
In stock
PTFE tubing for 1.75 mm 3D filament|XS tube / 200 cm / With cutters
High quality Capricorn PTFE tube set
  • 200 cm low friction PTFE
  • Flexible and low stretch
  • For 1.75 mm filament
  • 1.9 mm Inside Diameter
  • 4.0 mm Outside Diameter
 
 
€ 34.50
In stock
PTFE tubing for 1.75 mm 3D filament|Set of TL & XS / 100 cm / With cutters
High quality Capricorn PTFE tube set
  • 100 cm low friction PTFE
  • Flexible and low stretch
  • For 1.75 mm filament
  • 3.2 mm Inside Diameter
  • 6.4 mm Outside Diameter
 
 
€ 35.50
In stock
PTFE tubing for 2.85 mm 3D filament|TL Tube / 200 cm
High quality Capricorn PTFE tube set
  • 200 cm low friction PTFE
  • Flexible and low stretch
  • For 2.85 mm filament
  • 3.2 mm Inside Diameter
  • 6.4 mm Outside Diameter
 
 
€ 38.50
In stock
PTFE tubing for 2.85 mm 3D filament|XS tube / 200 cm
High quality Capricorn PTFE tube set
  • 200 cm low friction PTFE
  • Flexible and low stretch
  • For 2.85 mm filament
  • 3.0 mm Inside Diameter
  • 6.4 mm Outside Diameter
 
 
€ 38.50
In stock
PTFE tubing for 2.85 mm 3D filament|Set of TL & XS / 100 cm
High quality Capricorn PTFE tube set
  • 100 cm low friction PTFE
  • Flexible and low stretch
  • For 2.85 mm filament
  • 3.2 mm Inside Diameter
  • 6.4 mm Outside Diameter
 
 
€ 40.50
In stock
PTFE tubing for 1.75 mm 3D filament|Set of TL & XS / 100 cm
High quality Capricorn PTFE tube set
  • 100 cm low friction PTFE
  • Flexible and low stretch
  • For 1.75 mm filament
  • 1.9 mm Inside Diameter
  • 4.0 mm Outside Diameter
 
 
€ 44.50
In stock
PTFE tubing for 2.85 mm 3D filament|TL Tube / 200 cm / With cutters
High quality Capricorn PTFE tube set
  • 200 cm low friction PTFE
  • Flexible and low stretch
  • For 2.85 mm filament
  • 3.2 mm Inside Diameter
  • 6.4 mm Outside Diameter
 
 
€ 49.50
In stock
PTFE tubing for 2.85 mm 3D filament|XS tube / 200 cm / With cutters
High quality Capricorn PTFE tube set
  • 200 cm low friction PTFE
  • Flexible and low stretch
  • For 2.85 mm filament
  • 3.0 mm Inside Diameter
  • 6.4 mm Outside Diameter
 
 
€ 49.50
In stock
Why ReprapWorld?
  • Orders dispatched same business day
  • 3.000+ products in our assortment
  • More than 45.000 satisfied customers in over 40 countries
  • Secure payment for all payment options
  • Professional tech support (over 10 years 3D experience)
Pay safely using


home
Copyright 2009 - 2022 | ReprapWorld